此页面上的内容需要较新版本的 Adobe Flash Player。

获取 Adobe Flash Player

 Su Zhou city voltage regulator Co Ltd

 Tel:0512-67220971 0512-67212854

 Mobile:13962137043

 Fax:0512-67226176

 Email: info@cn-bs.net

High-current transformerDDG

Third, structural characteristics
     First, second all around with magnetic copper wire system, all with heart-type transformer core ferrite core, the electrical steel product made of Diego, a pillar on a multi-level ladder of circular cross section, iron yoke with rectangular cross section, the upper and lower Yoke Clamps on both sides as the use of channel, passing the yoke screw to achieve the compression of iron yoke, the upper and lower clamping screw using the hanging bear hanging tight to the fixed coil used.
Fourth, working conditions
1, no more than 1000 meters above sea level high pressure, such as more than 1000 meters, according to the standard power transformer capacity conversion.
2, ambient temperature is not higher than +40 ℃.
3, air relative humidity no higher than 85%.
4, no strong shock and severe corrosion of the gas.
Fifth, the use
1, the user before use, must select the appropriate transformer power supply wire and the local power grid voltage and the transformer nameplate, the power cable is correctly connected with input terminal.
2, the user root of the required voltage, the output wire access to the appropriate output terminals.
3, the load shall not exceed the nameplate data provided.
4, check the input and output power cord connection is correct only under the circumstances turn the power switch.
5, this series used the air switch, air switch after closing without a corresponding AC voltage output, to check the input and output wire connections are secure.
Sixth, customized special regulation transformer input, output voltage and connection as the demand side requirements set.